Double-break disconnector type SSBIII
Double-break disconnector type SSBIII
The horizontal double-break disconnector consists of three poles. Each pole consists of a frame, two supporting insulators at each end and one rotating insulator in the center, on which the main blade is mounted.
- Durable, low‑maintenance design
- Proven global reliability
- Easy installation and configuration in the field
Key features of our Double-Break Disconnector type SSBIII
The frame is made of a square tube in which in the center the bearing housing and the turntable are installed.
The turntable is supported by two roller bearings. The bearing housing is sealed and filled up with grease, to ensure a long lifetime. All steel parts of the disconnector are hot-dip galvanized.
The disconnectors can be equipped with insulators in accordance with IEC, ANSI or DIN specifications.
The main blade consists of two fixed contacts, mounted on the supporting insulators, and a moving blade mounted on the rotating insulator. The main contacts are installed inside the main blade. They are made of copper, with a silver-plated surface. Each contact finger is provided with stainless steel springs to ensure reliable contact pressure. The contacts are self-cleansing, which makes the disconnector suitable for installation in areas with severe climatic conditions. Depending on the voltage rating, anti-corona shields will be provided.
Hapam disconnectors may be equipped with earthing switches, which can be built-on to the right hand side and/or to the left hand side. The earthing switch consists of an Aluminum tube, provided with silver-plated contacts at both ends.
The disconnectors and/or earthing switches can be single-pole or three-pole operated by means of a motor-operated drive mechanism or a manual-operated drive mechanism.
In case only one drive mechanism is used for three-pole operation, the poles are interconnected by means of adjustable coupling rods. The drive mechanism also houses the auxiliary contacts for position indication.
The disconnectors and earthing switches are designed and tested in accordance with latest IEC specifications. Hapam maintains a quality assurance system according to ISO 9001, certified by DNV.
The disconnectors and earthing switches are pre-assembled and adjusted in our works as complete as possible. The construction is designed so that all disconnectors can be installed and adjusted at site very easily, without the need of any special tools. Hapam provides clear installation instructions and assembly drawings.
The disconnectors and earthing switches supplied by Hapam are designed so as to ensure that they are virtually maintenance free. However, to warrant a long and trouble-free service period, we advise that a visual inspection of the contacts and bearing points be carried out at regular intervals.
A Century of Power
Installation and maintenance
At Hapam, we are committed to ensuring long‑term reliability and performance for every high‑voltage disconnector and earthing switch we deliver. Our equipment is designed for durability, easy installation and minimal maintenance, but ageing grid infrastructure can introduce new challenges over time. That’s why we provide fast, efficient retrofit solutions, global service support and access to expert technicians across all regions. From spare parts and installation guidance to testing, technical assistance and emergency repairs, our service organization is ready to support you throughout the entire lifecycle of your equipment.
Looking for a high‑voltage solution?
We design and manufacture reliable high‑voltage disconnectors and earthing switches used worldwide. Whether you need technical advice, a custom configuration or full project support, we are here to assist you.